5 Inch Lift Kit 99-03 Toyota Tundra 4x4 & 2WD w/Steering Knuckles and SX8000 Shocks Tuff Country

Gain additional tire clearance to fit 33 inch tires and get a new new look with this Tuff County P/N 55905 Toyota Tundra 5 inch lift kit. This Toyota Tundra lift kit uses new replacement heavy duty spindles that eliminate the need for ball joint spacers. Upper ball joints and bearings are pressed into the new spindles.

Upper coil / strut spacers are used to lift the front end and maintain a factory ride. Replacement struts are not required. A lower subframe drops the lower control arms while stabilizing the front end with its one piece design. Once installed 33 inch x 12.5 inch tires can be mounted for a whole new look.
Details:

• 5 Inch Tundra Lift Kit w/ Steering Knuckles and Rear SX8000 Shocks
• Tuff Country 55905 includes heavy duty replacement spindles
• Upper coil / strut spacers maintain a near factory ride
• Front stock struts can be retained
• One-piece subframe for added strength
• Upper ball joints and bearings pressed into new spindles
• Allows use of 33 inch tires
• Proudly Made In The USA
• Limited Lifetime Warranty
• Sold As A Kit

Fits:

• 1999-2003 Toyota Tundra 4WD/2WD

Installation Notes:

• Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Front struts can be retained
• Factory rims will not fit with this lift kit. A rim with a 4.5 inch back spacing or less is required
• This kit is designed to fit with ABS brakes and automatic hubs. Vehicles without ABS brakes require optional ABS plugs
• Recommended Tire Size: 33 Inch x 12.5 Inch
• Amount of Lift: 5 Inches Front / 4 Inches Rear
• Includes: 1) One piece subframe, 2) Upper strut spacers, 2) Heavy duty steering knuckles, 2) Differential drop brackets, 2) Sway bar drop brackets, 1) Steering shaft extension, 2) Cast iron 4 inch rear lift blocks, 4) Rear u-bolts, 1) Hardware bag, 2) Rear SX8000 Shocks