2020–2026 Chevrolet Silverado 2500HD/3500HD & GMC Sierra 2500HD/3500HD Lighted Tailgate Protector

BUILT FOR SILVERADO HD & SIERRA HD TRUCKS

Your heavy-duty truck was built to haul, tow, work, and handle jobs that demand more. Its tailgate protection should be engineered with the same purpose.

The PALADIN Lighted Tailgate Protector™ combines vehicle-specific physical armor with integrated LED lighting in one purpose-built system for 2020–2026 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks.

Precision measurement, 3D scanning, and laser-cut components create a clean fit that follows the contours of the factory tailgate, while your choice of aluminum or heavy-duty steel armor helps protect its vulnerable upper edge from dents, dings, impacts, and everyday loading damage.

YOUR SILVERADO HD OR SIERRA HD. YOUR PALADIN.

CHOOSE YOUR PALADIN

HEAVY-DUTY TRUCK. PURPOSE-BUILT TAILGATE PROTECTION.

Loading tools. Moving equipment. Hitching trailers. Hauling materials. The upper edge of a heavy-duty truck's tailgate is exposed to frequent contact, and everyday work can leave dents, dings, scratches, and impact damage. PALADIN adds vehicle-specific armor over the factory tailgate cap to help protect this vulnerable area without removing the original cap. Choose the level that fits your truck's workload: 1/8-inch 5052 aluminum for lightweight protection, 14-gauge steel for demanding use, or 12-gauge steel for our highest level of tailgate armor. Durable finish options and an impact-resistant acrylic lightbar lens complete the system.

BUILT FOR HOW HD TRUCKS ARE USED

Silverado HD and Sierra HD trucks serve everyone from daily drivers and recreational towers to contractors, farmers, service fleets, construction crews, and commercial operators.

PALADIN lets you match the protection system to the job.

One truck family. Different jobs. Choose the PALADIN built for yours.

Built Specifically for the 2020–2026 Chevrolet Silverado 2500HD/3500HD & GMC Sierra 2500HD/3500HD

1
PSM PALADIN LED Tailgate Protector™ For 2019-2022 Chevrolet / GMC 1500 - Ultra Armor Series - PSM

YOUR SILVERADO HD OR SIERRA HD. YOUR PALADIN.

Choose the armor level, lighting configuration, and tailgate fitment that suit your truck and the work it does.

2

CHOOSE YOUR LEVEL OF PROTECTION

PALADIN is offered in four series, with three armor-plate constructions:

  • SENTRY and SHIELD: 1/8-inch 5052 aluminum

  • ARMOR: 14-gauge steel

  • ULTRA ARMOR: heavy-duty 12-gauge steel

Each series adds a vehicle-specific protective layer over the factory tailgate cap to help guard against everyday loading damage. Select the armor level that matches how you use your Silverado HD or Sierra HD.

3

CHOOSE YOUR LIGHTBAR

  • Sentry Series : Red running Light only.  Value edition.

  • Full Function Lightbar: Sequential red or amber turn signal/hazards, red running and brake lights, white reverse.

  • Insignia Lightbar:  Your brand inserted into the lightbar visible day or night!

  • Alert Lightbar:  High intensity selectable pattern amber/white alert lights. (Coming soon!)
4

CHOOSE YOUR FINISH

  • Premium Polyurea-based Bed Liner

  • Durable Black Textured Powder Coat
CHOOSE YOUR PALADIN

Four Levels of Protection. One Unstoppable Tailgate Protector.

1

SENTRY SERIES

Essential Protection. PALADIN Engineering.

SENTRY delivers PALADIN protection in a lightweight configuration designed for everyday truck owners.

A 1/8-inch 5052 aluminum armor plate helps protect the vulnerable upper portion of your tailgate while a durable, weather-resistant lightbox integrates lighting into the PALADIN design.

Best For: Daily drivers, personal trucks and light-duty use.

2

SHIELD SERIES

Step Up Your Protection.

SHIELD combines a 1/8-inch 5052 aluminum armor plate with full-function integrated LED lighting for truck owners looking for an ideal balance of protection, visibility and value.

It's a versatile PALADIN for trucks that see everything from daily commuting to weekend adventures and regular work-duty use.

Best For: Daily drivers, recreational trucks, weekend warriors and light-duty work trucks.

3

ARMOR SERIES

Serious Protection for Working Trucks.

ARMOR steps up to heavy-duty 14-gauge steel construction for Silverado and Sierra trucks that work harder and face a greater risk of tailgate damage.

Integrated full-function LED lighting combines visibility with rugged physical protection in one purpose-built system.

Best For: Contractors, tradespeople, commercial vehicles, fleet trucks and demanding recreational use.

4

ULTRA ARMOR SERIES

Maximum PALADIN Protection.

ULTRA ARMOR is built for demanding environments where maximum tailgate protection matters.

Constructed from heavy-duty 12-gauge steel, ULTRA ARMOR is the top level of protection in the PALADIN lineup and is engineered for trucks exposed to demanding commercial, industrial and heavy-duty use.

Best For: Construction, utilities, municipalities, commercial fleets, industrial applications and demanding work environments.

CHOOSE YOUR PALADIN

MORE THAN A TAILGATE CAP. MORE THAN A LIGHT BAR.

The PALADIN Lighted Tailgate Protector™ brings two functions together in one vehicle-specific system: physical protection for the vulnerable upper edge of your Silverado HD or Sierra HD tailgate and integrated LED lighting across the rear of the truck.

Unlike a conventional tailgate cap, PALADIN adds functional illumination. Unlike a stand-alone LED light bar, PALADIN incorporates that lighting into a protective armor assembly engineered around your HD truck.

Protection + Lighting. Engineered as One System.

Choose Your Lighting Options

1

SENTRY SERIES — ESSENTIAL ILLUMINATION

PALADIN SENTRY combines precision-fit 1/8-inch 5052 aluminum tailgate armor with an integrated red LED running light. It's an accessible choice for Silverado HD and Sierra HD owners who want essential lighting and vehicle-specific tailgate protection.

2

FULL-FUNCTION & SPECIALTY LIGHTING

Available full-function PALADIN configurations feature red or amber sequential turn signals and hazard lighting, red running and brake lights, and white reverse lights.

Specialized lighting may be offered for selected utility, industrial, and fleet applications. Availability depends on the series, truck application, and selected configuration; contact TRUCKED UP to confirm specialty options before ordering.

3

TURN YOUR WORK TRUCK INTO A MOVING BILLBOARD

For contractors, service companies, municipalities, and fleet operators, the available PALADIN INSIGNIA Lightbar transforms tailgate protection into an illuminated branding opportunity.

Incorporate your company name or authorized logo into a distinctive display while PALADIN helps protect the upper edge of your truck's tailgate.

Protect your equipment. Present a professional fleet. Put your brand to work every mile.

Customers must own or have authorization to use submitted names, logos, and trademarks.

CHOOSE YOUR PALADIN

CHOOSE YOUR LEVEL OF PROTECTION

Every PALADIN protects the vulnerable top edge of your tailgate. The difference is how much armor and capability you want.

PALADIN versions come in aluminum or steel protective armor plate and your choice of protective finishes and LED lightbars. 

* All  top plates work well with tonneau covers tested.  Some adjustment may be necessary. 

STARTING AT

$395

$470

$545

$655

IDEAL FOR

Everyday Use

Everyday Use

Heavier Duty Use

Heavy Duty / Commercial Use

TOP PLATE

1/8" 5052 Aluminum

1/8" 5052 Aluminum

14 Gauge Steel

12 Gauge Steel

PROTECTION

Black Textured Powder Coat

Black Textured Powder Coat or Premium Polyurea-Based Bed Liner

Black Textured Powder Coat or Premium Polyurea-Based Bed Liner

Premium Polyurea-Based Bed Liner

LIGHTBAR ENCLOSURE

Carbon Fiber Reinforced ASA

Carbon Fiber Reinforced ASA

Carbon Fiber Reinforced ASA

Carbon Fiber Reinforced ASA

TONNEAU COVERS*

LIGHTBAR OPTION

SENTRY LIGHTBAR - Running Lights Only

FULL FUNCTION - Turn Signals, Brake, Running, and Reverse

FULL FUNCTION - Turn Signals, Brake, Running, and Reverse

FULL FUNCTION - Turn Signals, Brake, Running, and Reverse Plus Optional Special Function Lightbars.

LIGHTBAR OPTION

INSIGNIA LIGHTBAR - Company Branding / Running Lights Only

INSIGNIA LIGHTBAR - Company Branding / Running Lights Only

INSIGNIA LIGHTBAR - Company Branding / Running Lights Only

INSIGNIA LIGHTBAR - Company Branding / Running Lights Only

INSTALL

Easy Installation with Detailed Instructions

Easy Installation with Detailed Instructions

Easy Installation with Detailed Instructions

Easy Installation with Detailed Instructions

WIRING

Installation Kit (Included)

Full Harness and Installation Kit (Included)

Full Harness and Installation Kit (Included)

Full Harness and Installation Kit (Included)

FIND YOUR PALADIN

Select your truck and choose the PALADIN series designed for your application.

Vehicle fitment

Precision Crafted for your 2020–2026 Chevrolet Silverado 2500HD/3500HD & GMC Sierra 2500HD/3500HD

YEARMAKEMODEL
2020ChevroletSilverado 2500HD/3500HD
2021ChevroletSilverado 2500HD/3500HD
2022ChevroletSilverado 2500HD/3500HD
2023ChevroletSilverado 2500HD/3500HD
2024ChevroletSilverado 2500HD/3500HD
2025ChevroletSilverado 2500HD/3500HD
2026ChevroletSilverado 2500HD/3500HD
2020GMCSierra 2500HD/3500HD
2021GMCSierra 2500HD/3500HD
2022GMCSierra 2500HD/3500HD
2023GMCSierra 2500HD/3500HD
2024GMCSierra 2500HD/3500HD
2025GMCSierra 2500HD/3500HD
2026GMCSierra 2500HD/3500HD

PRECISION-FIT FOR 2020–2026 SILVERADO HD & SIERRA HD

PALADIN isn't a universal tailgate accessory adapted to fit multiple unrelated trucks.

Each vehicle-specific design begins with precision measurement and 3D scanning to capture the dimensions and contours of the Silverado HD and Sierra HD tailgate. Components are then precision laser-cut to create a clean, accurate fit for the specific truck application.

The result is protection engineered around your HD tailgate rather than a universal accessory made to approximately fit it.

Built for your truck. Not adapted to it.

PROTECT. ILLUMINATE. DOMINATE.

Your Silverado HD or Sierra HD was built to handle more. PALADIN adds protection where the tailgate is especially vulnerable while integrating functional LED lighting into a clean, vehicle-specific armor system.

Whether your HD truck pulls a trailer on the weekend, carries tools to the jobsite every morning, or works as part of a commercial fleet, PALADIN gives you a choice of protection levels engineered around how hard you use your truck.

PSM PALADIN LED Tailgate Protector™ For 2019-2022 Chevrolet / GMC 1500 - Ultra Armor Series - PSM
PSM PALADIN LED Tailgate Protector™ For 2019-2022 Chevrolet / GMC 1500 - Ultra Armor Series - PSM

READY TO PROTECT YOUR SILVERADO / SIERRA?

Choose your PALADIN series and lighting configuration above, then select the product designed specifically for your 2020–2026 Chevrolet Silverado 2500HD/3500HD & GMC Sierra 2500HD/3500HD.

SHOP SILVERADO HD & SIERRA HD PALADIN

Installation Instructions

Have Questions?
We Have Answers.

Frequently Asked Questions

More Questions?

Does PALADIN fit my 2020–2026 Silverado 2500HD/3500HD or Sierra 2500HD/3500HD?

Yes. The PALADIN Lighted Tailgate Protector™ is available for 2020–2026 Chevrolet Silverado 2500HD and 3500HD and GMC Sierra 2500HD and 3500HD trucks.

PALADIN is not a universal tailgate accessory. Each application is engineered around the dimensions and contours of the specific factory tailgate using precision measurement, 3D scanning, and laser-cut components for a clean, vehicle-specific fit.

Always select your exact year, make, model, and tailgate configuration when ordering to ensure you receive the correct PALADIN for your truck.

Does PALADIN fit both standard and Multi-Flex/MultiPro tailgates?

Yes. PALADIN Lighted Tailgate Protectors™ are available for both standard tailgates and GM's Multi-Flex/MultiPro tailgate systems on supported Chevrolet Silverado HD and GMC Sierra HD applications.

Because the standard and multifunction tailgates have different designs and contours, PALADIN is engineered specifically for the tailgate configuration selected—not treated as a one-size-fits-all application.

When ordering, simply select the correct year, make, model, and tailgate type for your truck to ensure you receive the PALADIN designed for your specific configuration.

Whether your Silverado HD is equipped with a standard or Multi-Flex Tailgate, or your Sierra HD has a standard or MultiPro Tailgate, you can choose the PALADIN protection level and lighting configuration that best matches how you use your truck.

Which PALADIN protection level is best for a work truck?

That depends on how hard you use your truck.

SENTRY and SHIELD use 1/8-inch 5052 aluminum armor and provide strong, lightweight protection for daily-driven HD trucks, recreational towing, and lighter-duty use.

ARMOR steps up to 14-gauge steel for contractors, service trucks, fleets, frequent hauling, and trucks exposed to greater loading and jobsite activity.

ULTRA ARMOR uses heavy-duty 12-gauge steel and provides the highest level of PALADIN tailgate protection for demanding construction, utility, industrial, commercial, and fleet applications.

The goal isn't simply to choose the heaviest PALADIN—it's to choose the protection level that best matches how you use your truck.

Do I need ULTRA ARMOR because I own a 2500HD or 3500HD?

Not necessarily. Owning an HD truck doesn't automatically mean you need our heaviest protection level.

If your Silverado HD or Sierra HD is primarily a daily driver, tow vehicle, or recreational truck, SENTRY or SHIELD may provide all the protection you need while keeping the armor lightweight.

If your truck regularly carries tools, equipment, materials, or sees frequent jobsite use, ARMOR's 14-gauge steel construction provides an additional level of physical protection.

For demanding commercial, construction, utility, industrial, and fleet environments, ULTRA ARMOR's 12-gauge steel construction provides maximum PALADIN tailgate protection.

Choose your PALADIN based on how your truck works—not simply the badge on the fender.

Does PALADIN replace the factory tailgate cap?

No. PALADIN is designed to install over the factory tailgate cap, so there's no need to remove the original cap from your Silverado HD or Sierra HD.

The PALADIN armor assembly adds a protective layer over this vulnerable area of the tailgate, helping protect it from dents, dings, impacts, scratches, and everyday loading damage while maintaining a clean, vehicle-specific appearance.

How does PALADIN attach to my Silverado HD or Sierra HD?

PALADIN is engineered for vehicle-specific installation using the factory tailgate as the foundation rather than requiring extensive modification to your truck.

The protector installs over the factory tailgate cap and is secured using the attachment method engineered for your specific PALADIN application. The integrated lighting is then connected using the appropriate PALADIN wiring solution for your truck.

Installation instructions are provided for the specific application so you can properly fit, secure, and connect your PALADIN system.

Will PALADIN interfere with GM's trailer monitoring system?

PALADIN is designed to integrate with your Silverado HD or Sierra HD using the appropriate vehicle-specific wiring solution.

When equipped with a compatible PALADIN Quick-Connect Adapter Harness, applicable lighting configurations connect through the factory taillight wiring rather than occupying the truck's trailer-lighting connector. This arrangement is designed to help avoid false trailer detection and related monitoring conflicts while keeping the factory trailer connector available for towing.

Wiring requirements may vary by model year, lighting configuration, and vehicle equipment. Always use the harness and installation instructions specified for your application.

Can I tow normally with PALADIN installed?

Yes. PALADIN is designed to protect and illuminate your tailgate without taking away the towing capability you bought your Silverado HD or Sierra HD to use.

When equipped with the appropriate PALADIN Quick-Connect Adapter Harness, the integrated lighting connects through the vehicle's OEM taillight wiring rather than occupying the factory trailer connector. Your trailer connection therefore remains available for normal towing use.

Always follow Chevrolet or GMC towing requirements for your specific truck, trailer, hitch, and equipment.

Does PALADIN work with tonneau covers and camper shells?

PALADIN is designed to work with many tonneau covers and camper shells while adding protection over the factory tailgate cap. Compatibility depends on how the cover or shell overlaps the top and rear edge of the tailgate.

Some tonneau covers may require adjustment, and certain designs may not be compatible. If you're unsure, contact TRUCKED UP with your truck details and the cover or shell manufacturer and model before ordering.

Can I add my company name or logo to my PALADIN?

Yes. The available PALADIN INSIGNIA Lightbar can incorporate an approved company name or logo into the illuminated lightbar, turning your tailgate protector into a distinctive branding feature for your truck or fleet.

It's especially well suited for contractors, service companies, construction businesses, municipalities, and commercial fleets that want their vehicles to present a consistent professional identity while adding PALADIN tailgate protection and integrated lighting.

Your truck already travels to jobsites, customers, and communities every day. Put that visibility to work for your business.

Customers must own or have authorization to use submitted names, logos, and trademarks.

Is PALADIN suitable for commercial and fleet trucks?

Yes. PALADIN's multiple protection levels make it particularly well suited to Silverado HD and Sierra HD trucks used by contractors, service companies, construction crews, utilities, municipalities, and commercial fleets.

Fleet operators can select the protection level that matches each vehicle's duty cycle—from lightweight aluminum protection for supervisory and service vehicles to 14-gauge ARMOR and heavy-duty 12-gauge ULTRA ARMOR for trucks exposed to more demanding work environments.

Available INSIGNIA Lightbar branding can also incorporate an approved company name or logo, helping create a consistent and professional fleet appearance while putting your brand in front of customers wherever your trucks go.

Is PALADIN made in the USA?

Yes. PALADIN products are designed and built in the USA by Powershift Manufacturing.

From vehicle-specific engineering and 3D scanning to precision-cut armor components, PALADIN is developed around the trucks it is designed to protect—not adapted from a one-size-fits-all universal accessory.

It's part of our commitment to building truck protection that combines purposeful engineering, durable materials, integrated lighting, and vehicle-specific fitment.

text-block-image-template--28694160245018__ss_text_block_pro_VTPPKG

DESIGNED AND BUILT IN THE USA

Family Owned and Operated

To us, American Made signifies more than exceptional craftsmanship. It reflects our promise to improve our customers’ experiences on the road and to support the people and communities we call home.

Learn More

PSM PRECISION ENGINEERING

Every PALADIN vehicle-specific design begins with a precision 3D scan, capturing the exact measurements and subtle contours of the tailgate. Components are then precision laser-cut to create an accurate, vehicle-specific fit.

For the 2020–2026 Chevrolet Silverado 2500HD/3500HD & GMC Sierra 2500HD/3500HD that process is used to engineer the PALADIN specifically around the truck's tailgate.

LOOKING FOR ANOTHER TRUCK?

Find the PALADIN designed specifically for your vehicle.